Step-by-Step Instructions
1. Cut the PVC pipe to a length of 2 feet if not pre-cut.
2. Attach the PVC end cap to one end of the pipe using PVC cement, ensuring a tight seal.
3. Fix the threaded adapter to the other end of the pipe, also using PVC cement.
4. Once the cement is dry, wrap the threads of the adapter with electrical tape to ensure an airtight seal.
5. Connect the air compressor to the threaded adapter.
6. Load a few nails or brads into the open end of the pipe.
7. Turn on the air compressor and allow air pressure to build up in the pipe.
8. When ready, release the air pressure to launch the nails safely, aiming away from people and fragile objects.