1. Measure your corner space and decide on three shelf lengths, for example: 24", 20", and 16".
2. Cut three 1x3 pine boards to these lengths using the chop saw.
3. Cut a small 1/2" high lip strip from 1x3 pine (about 3/4" wide) for each shelf's front edge, matching the shelf length.
4. Using the jigsaw, cut a 45-degree diagonal on the outer front corner of each shelf board for a modern touch.
5. Sand all pieces smooth, starting with 120 grit and finishing with 220 grit.
6. Glue and nail the lip strip along the front edge of each shelf, flush with the top surface.
7. Cut three plywood cleats about 3" wide and the same length as each shelf.
8. Attach cleats to the back side of each shelf using wood glue and 1 1/4" screws, positioning cleats flush to the back edge.
9. Fill any screw holes with wood filler and sand smooth when dry.
10. Prime and paint or stain shelves and cleats as desired; allow to dry completely.
11. Locate studs or use appropriate anchors in your wall corners.
12. Mount shelves by screwing through the cleats into the wall studs or anchors, ensuring they are level and securely fastened.
13. Arrange craft paints on the shelves; the lip will prevent them from sliding off.
14. Optionally, apply a clear polyurethane coat for extra durability once paint or stain is dry.