Step-by-Step Instructions
1. Cut the wood boards into the following pieces:
- 2 side panels: 60 inches each
- 3 shelves: 28 inches each
2. Sand all pieces thoroughly with 120 grit sandpaper, then finish smooth with 220 grit.
3. Lay one side panel flat and apply wood glue along the edge where a shelf will attach.
4. Position the first shelf 10 inches from the bottom and clamp or hold in place.
5. Pre-drill screw holes through the side panel and into the shelf to prevent splitting.
6. Secure the shelf to the side panel with wood screws.
7. Repeat steps 3-6 for the other two shelves, spacing them evenly (about 12 inches apart).
8. Attach the second side panel to the other side of the shelves using glue and screws, aligning edges carefully.
9. Fill any screw holes with wood filler if desired and sand smooth once dry.
10. Apply wood stain or paint as desired, allowing to dry fully.
11. Seal the bookshelf with a clear wood finish or polyurethane for durability.
12. Let the finish cure as per product instructions before loading books.