Guitar Stand & Chair Combo

This elegant wooden creation serves as both a functional guitar stand and a comfortable chair, perfect for musicians who value style and utility. The sleek design will complement any room while providing practical use.

Intermediate 6 hours $75

Instructions

1. Cut the 1x12 pine board into a rectangular piece (24 inches wide by 36 inches tall) for the chair back. 2. Cut the 1x4 pieces into four legs, each 36 inches long. 3. Attach the legs to the corners of the back piece using wood glue and screws, ensuring stability. 4. Cut another piece of the 1x12 board into a seat (24 inches wide by 24 inches deep) and attach it to the legs with screws. 5. Cut a shallow groove into the front of the seat piece to hold the guitar neck securely. 6. Sand all surfaces thoroughly using 120 grit sandpaper first, then finish with 220 grit for a smooth surface. 7. Stain or paint the wood to your desired finish and allow it to dry. 8. Apply a coat of varnish or polyurethane for protection and durability. 9. If desired, attach a cushion to the seat for added comfort. 10. Position the guitar stand section (the groove) at a 30-degree angle to hold the guitar securely when not in use.

Materials

1. 1x12 inch pine board (8 feet long) 2. 1x4 inch pine boards (2 pieces, 4 feet long) 3. Wood glue 4. Wood screws (1.5 inches) 5. Sandpaper (120 and 220 grit) 6. Wood stain or paint (optional) 7. Varnish or polyurethane finish 8. Cushion for seat (optional) 9. Wood clamps 10. Measuring tape 11. Circular saw or miter saw 12. Drill with bits 13. Screwdriver 14. Safety goggles 15. Dust mask