Step-by-Step Instructions
1. Prepare Workspace: Lay protective cloth on the floor to prevent marble damage.
2. Assemble Coffee Table Frame:
- Attach the 4 wooden legs to 4 of the marble slabs using metal L-brackets.
- Position each leg at the corners under the marble slabs.
- Use drill and screws to secure L-brackets connecting legs to marble slabs.
- Stack two marble slabs to form a double-layer tabletop by placing one on top of the assembled slab with legs, use rubber bumpers between slabs to prevent slipping.
3. Construct Flowering Pot Stand Frame:
- Using the remaining 2 marble slabs as sides, stand them vertically as the sides of the pot stand.
- Use wooden board as base between the two marble slabs.
- Attach wooden legs (approx. 30 cm) to the underside of the wooden base for elevation.
- Connect marble slabs to wooden base and legs using corner braces and screws.
- Ensure stability by tightening all screws and checking with a level.
4. Finishing Touches:
- Sand any rough edges on wooden parts.
- Place rubber bumpers on all contact points to protect marble surfaces.
- Position your flowering pot on the stand and place the coffee table in your desired spot.
5. Maintenance Advice:
- Avoid dragging marble slabs to prevent scratches.
- Clean marble surfaces with a soft damp cloth.