Step-by-Step Instructions
1. Measure and cut the plywood or MDF board to create the base, two sides, and two ends of the box.
2. Assemble the box using wood glue and screws for added strength.
3. Sand all edges and surfaces smoothly with medium and fine grit sandpaper.
4. Cut the dividers from leftover wood into strips that are 11cm high and 1cm wide.
5. Mark the interior of the box every cm to create slots for the dividers.
6. Drill holes at each mark, ensuring they are aligned on both sides of the box.
7. Insert the dividers into the drilled holes, adjusting as needed.
8. Optionally, finish the box with wood stain or paint for a polished look.
9. Allow everything to dry completely before use.