Step-by-Step Instructions
1. Prepare your workspace by covering surfaces with newspaper or a plastic sheet to catch any spills.
2. Put on your protective gloves to safeguard your skin from the resin.
3. Measure and mix the epoxy resin according to the manufacturer's instructions in a mixing cup.
4. Add a few drops of pink resin dye to the mixed resin and stir thoroughly until you achieve the desired shade of pink.
5. Pour the pink resin mixture into the heart-shaped silicone mold, filling it to the top.
6. If desired, you can add glitter or small decorations into the resin at this stage for extra flair.
7. Use a stirring stick to remove any bubbles that may form in the resin.
8. Allow the resin to cure as per the instructions on the resin packaging (typically 24 hours).
9. Once cured, carefully remove the heart from the silicone mold.
10. Use fine-grit sandpaper to smooth any rough edges.
11. Attach the keyring hardware to the heart-shaped resin piece using the provided rings and chain.
12. Your translucent pink heart-shaped resin keyring is ready for use!