Step-by-Step Instructions
Measure and cut the wooden planks:, - For each level, cut two side panels 50 cm deep x 30 cm high (lower level) and 45 cm high (upper level)., - Cut four front/back panels 80 cm wide x 30 cm high (lower level) and 45 cm high (upper level)., - Cut additional support slats for the bottom of each level to hold the plastic boxes., Sand all wood pieces smoothly to avoid splinters., Assemble the lower level box by attaching the front, back, and side panels with wood screws and wood glue. Ensure the corners are square., Attach support slats inside the lower box frame at the bottom to hold the plastic containers securely., Repeat steps 3 and 4 for the upper level box., Connect the two levels by fixing the upper box securely on top of the lower box using screws through the bottom of the upper box into the top edges of the lower box., Optionally, apply wood stain or paint for weather protection and aesthetic., Once dry, place the plastic planter boxes inside each level., Fill the plastic boxes with soil and plant your strawberry plants., Optionally, line the wooden boxes with plastic liner or weed barrier fabric to protect the wood from moisture., Position your planter in a sunny spot and water regularly.