Step-by-Step Instructions
1. Measure and mark the acrylic sheet into three parts: one 12x12 inch square (top) and two 12x6 inch rectangles (legs).
2. Carefully score the acrylic along the marks using a utility knife and snap each piece along the scored line.
3. Lightly sand the edges of each acrylic piece to smooth any roughness.
4. Position the two leg pieces vertically and attach them to the underside of the top square using the plastic corner brackets and screws; place brackets at each corner where legs meet the top.
5. Attach rubber feet to the bottom of each leg to protect floors and provide stability.
6. Inspect the table for any loose screws and tighten as needed.
7. Clean the acrylic surface with a soft cloth to remove fingerprints or dust.